TDC 40, CAST IRON, GRADE 1 Door Closer

SPECIFICATIONS
Body
Heavy-duty cast iron body, non-handed
Rack and Pinion
Precision rack and pinion construction
Arm
Regular arm standard; Friction Hold-Open, Cush, Hold-Open and Cush arm
Installation
Tri-Style installation, includes hardware and brackets to allow for regular, top jam and parallel arm installation
Spring Power
Adjustable spring power from size 1 to size 6, factory present size 3
Latch Valve
Adjustable standard
Sweep Valve
Adjustable standard
Back Check Valve
Adjustable standard
Delayed Action Valve
Adjustable, optional
Fluid
All weather fluid, allowing door closer to perform in temperatures ranging from -31°F to 140°F
Needle Bearing
Standard for higher efficiency
Piston
1-1/2″ (38mm) diameter piston
5/8″ (16mm) diameter pinion
2-5/16″ (58mm) projection
Maximum Door Opening
Regular arm 180°, Parallel arm 180°, Top jamb 180°

CODE COMPLIANCE
ANSI/BHMA
A156.4 Grade 1 Certified
UL
UL &ULC Listed
BAA
BAA model meets guidelines of the Buy American Act
ADA
TDC-70BF adjustable to meet requirements of the Americans with Disabilities Act

• Regular, standard
• Barrier Free
• Delay Action

Drop Plates:

• TPDC-718; required for hinge side mount where top rail is less than 3-3/4″ (95mm) measured from the top. Plate requires top rail minimum 2″ (51mm) in height
• TPDC-718TJ; applicable in places where head frame face is less than 3-1/2″ (89mm) in height. Plate require 1-3/4″ (44 mm) minimum head frame
• TPDC-718G; applicable in places where top of head frame in flush with ceiling condition. Plate requires 1-3/4″ (44mm) minimum head frame
• TPDC-718PA; required for parallel arm mounting where top rail is less than 5-1/2″ (140mm), measured from the top. Plate requires 2″ (51mm) minimum top rail.

• Cush Arm
• Friction Hold Open Arm
• Hold-Open and Cush Arm
• Slide Track Arm

• AL, Aluminum Finish
• DU, Duronatic

• 25 years limited